Compensators

 Hydraulic Compensator – Hyco 0.6 and 1.4L

The Hyco 0.6 and 1.4L are a spring loaded hydraulic compensators and can be used to adapt to volume changes by differential oil volumes, temperature change or small loss of oil in closed oil circuits. They are designed for underwater use in depths up to 3,000 msw. A conical shaped top inside is used as an air catcher to allow easy de-airing on top after installation. The compensator is provided with a externally visible level indicator with a level groove for nominal oil level. Optionally, a magnetic low level detection indicator with electrical connector can be supplied. The indicator can be mounted at a later stage without disassembling or removing compensator parts. (The level indicator is a hardwired device).

Typical applications for the Hyco hydraulic compensators are in systems like:

• Hydraulic systems
• Hydraulic / electric motors
• Valve packs
• Junction boxes
• Seal closed shafts

The Hyco 15L® is a spring loaded hydraulic compensator suitable for water depths up to 3,000 msw. The compensator’s design makes it is highly resistant to sand and silt which makes it reliable even in the worst dredging conditions. A level measurement option allows you to monitor your system online.

downloads

• Hyco 15L (365.3 kB)